GAS ANALYZERS by BlueSens, Germany

For further details on any product, get in touch with us

General
Product details

BlueVary: Maintenance free variable off gas sensor

BlueVary consists of a basis station with three plug-in positions for gas sensor cartridges. Two different gases can be measured at once. The third plug-in position holds a pressure or pressure/humidity sensor cartridge. Gas sensor cartridges are selectable according to your application and can be changed easily as required.

Download Brochure

3 cartridge plug-in positions
1 for pressure/humidity
2 for two various gas cartridges
Variable connections and data output options
Light but robust plastic housing
Cartridges for CO2, O2, CH4 and H2 available
BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

General
Product details

BlueInOne: Parallel measurement of CO2 and O2 concentrations

BlueInOne is designed to measure concentrations of carbon dioxide and oxygen in biotechnological processes. It can be connected directly to the exhaust gas flow of fermenters and bioreactors from benchtop to industrial scale without a requirement for pretreatment of the gas stream.

Download Brochure

continuous parallel measurement of O2 and CO2 ➔ no need for sampling
multiple CO2 and O2 calibration ranges are available
BlueInOne cell will operate from 0 to 100% oxygen
BlueInOne ferm will operate from 0.1-25% or 1-50% oxygen
compact stainless-steel housing ➔ robust and easy to clean
PAT and QbD conforming in-situ-measurement ➔ for highest standard of quality
auto compensated for humidity and pressure ➔ no need for extra gas coolers, pumps or valves
real-time process optimization ➔ see what happens when it happens – fast response option
BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

General
Product details

YieldMaster: Simultaneous measurement of CH4 concentration and volume.

The BMP (biomethane potential) test system „Yieldmaster“ is a sophisticated and modular analysis system. In its basic setup it consists of a gas bottle connected via tubing to BlueVCount, precision gas volume measurement device. It measures up to 80ml/min with a resolution of 1ml and consists of a volume measurement cell as well as temperature and pressure sensor.

Download Brochure

Compliant to VDI 4630
No minimal gas flow needed
High sample throughput
Real-time values during methane production
Monitoring metabolism phenomena
Numerous samples in parallel means better comparability of results
Automatic data acquisition
High grade of automation
BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

General
Product details

BCP Series: In-situ real time gas analysis can be done using BCP

The BCP gas analyzers are available for CO2, O2, H2, CH4 and EtOH (on request). They can be applied in every scale starting from shake flasks or anaerobic digesters in the lab up to industrial scales.

Download CO2 Brochure

Download O2 Brochure

Download H2 Brochure

Download CH4 Brochure

Continuous measurement - no sampling required
No pre-treatment of the exhaust stream required sensor can operate in fully saturated gas streams
No maximum or minimum flow rates
Plug & Play’ ease of operation
Connect to power, gas stream and data collector - data available in minutes
In use with every fermenter brand and vessel volume (shake flasks – 300,000L)
In Use with cell culture and microbial single use fermentation systems.
Digital and analogue data communication RS232, RS485, Ethernet, 4-20
BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

General
Product details

BlueVCount: High quality gas volume measurement

BlueVCount is a gas counter and measures gas volumes in reactions of all kind. It is applicable for fermentations, degradation studies, substrate comparison studies, wastewater treatment studies, bioethanol or hydrogen production and is especially helpful in bio methane potential (BMP) determinations in industry and academia.

Download Brochure

More process information for a better process understanding
Leads to less number of experiments and optimized yields
No water or oil refill necessary
Shows normalized volume because of integrated pressure and temperature sensors
Integrated display for data information at any time
Combinable devices (daisy chain) for less cable tangle
BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

GAS ANALYZERS by BlueSens, Germany

BlueVary: Maintenance free variable off gas sensor

3 cartridge plug-in positions

1 for pressure/humidity

2 for two various gas cartridges

Variable connections and data output options

Light but robust plastic housing

Cartridges for CO2, O2, CH4 and H2 available

BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

BlueInOne: Parallel measurement of CO2 and O2 concentrations

BlueInOne is designed to measure concentrations of carbon dioxide and oxygen in biotechnological processes. It can be connected directly to the exhaust gas flow of fermenters and bioreactors from benchtop to industrial scale without a requirement for pretreatment of the gas stream.

continuous parallel measurement of O2 and CO2 ➔ no need for sampling

multiple CO2 and O2 calibration ranges are available

BlueInOne cell will operate from 0 to 100% oxygen

BlueInOne ferm will operate from 0.1-25% or 1-50% oxygen

compact stainless-steel housing ➔ robust and easy to clean

PAT and QbD conforming in-situ-measurement ➔ for highest standard of quality

auto compensated for humidity and pressure ➔ no need for extra gas coolers, pumps or valves

real-time process optimization ➔ see what happens when it happens – fast response option

BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

YieldMaster: Simultaneous measurement of CH4 concentration and volume.

Compliant to VDI 4630

No minimal gas flow needed

High sample throughput

Real-time values during methane production

Monitoring metabolism phenomena

Numerous samples in parallel means better comparability of results

Automatic data acquisition

High grade of automation

BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

BCP Series: In-situ real time gas analysis can be done using BCP

The BCP gas analyzers are available for CO2, O2, H2, CH4 and EtOH (on request). They can be applied in every scale starting from shake flasks or anaerobic digesters in the lab up to industrial scales.

Continuous measurement - no sampling required

No pre-treatment of the exhaust stream required sensor can operate in fully saturated gas streams

No maximum or minimum flow rates

Plug & Play’ ease of operation

Connect to power, gas stream and data collector - data available in minutes

In use with every fermenter brand and vessel volume (shake flasks – 300,000L)

In Use with cell culture and microbial single use fermentation systems.

Digital and analogue data communication RS232, RS485, Ethernet, 4-20

BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC

BlueVCount: High quality gas volume measurement

More process information for a better process understanding

Leads to less number of experiments and optimized yields

No water or oil refill necessary

Shows normalized volume because of integrated pressure and temperature sensors

Integrated display for data information at any time

Combinable devices (daisy chain) for less cable tangle

BlueVIS 4.0: Can calculate OUR, CER, RQ values and is compatible with other process-control software via OPC